Having access to a garage in North Texas can be a godsend during the summer months, since it helps avoid getting into a vehicle that can be unbearably hot. By simply closing the door, that heat is held at bay, but inevitably, garage door repair becomes a necessity for a homeowner or business.
Such repairs stem from inefficient or non-working springs, which means that garage spring replacement is the next step. The problem is that the garage door springs Burleson residents already have usually don’t give off warning signs. That requires being aware of the telltale signs of broken garage door springs.
Listed below are some key determinants in figuring out if the garage door springs Burleson residents have in place are still viable:
Size and Age Questions
The size of the door itself can usually answer that question. The largest usually have a torsion spring that’s located just above the door, while smaller ones tend to require the use of extension springs.
How much usage the door has gotten is one of the ways to gauge exactly how long a spring should last. Since some garages are more active than others, the usual span before repair or replacement is needed ranges from seven to 12 years.
Out of the Ordinary Movement
If the door quickly comes down in contrast to the normal slow but steady pace you’re used to, a definite problem exists. In that same vein, if the door only comes down halfway and then stops, it quickly becomes clear that garage spring replacement is in the offing.
Other odd movements include a jerking motion that indicates one of the two extension springs is broken. Ordinarily, that can be handled by making sure that the hinges, rollers and springs receive regular maintenance, simply by applying lubrication.
Troubles with Torsion Springs
A broken torsion spring is immediately detected when a two-inch gap exists anywhere on the spring. Meanwhile, some garage doors with two torsion springs need repair because only one is working, which is when that jerky movement occurs. It’s best to have them both replaced at the same time to avoid additional service calls later.
No Door Movement
Those with automatic openers have access to a red release rope button for emergencies. If pressing that button results in no door movement, a broken spring is the likely culprit. While lifting the door is still possible, it will likely take multiple people and could aggravate back or other health issues.
Extension Cables and Pulleys
For those using extension springs for their doors, the sight of seeing both the cable and pulley hanging down means that a spring has broken. This is another instance where getting it fixed quickly is the right decision.
The Look of the Door
When a garage door is halfway down, everything should be aligned properly. If the door looks crooked or the top section is bent, a call to have some garage door repair should be your next move. This makes the door virtually impossible to close and is a task that do-it-yourselfers should never attempt.
The reason is that to obtain the sort of power needed to easily lift up a door that might weigh close to a half-ton, the spring is tightly wound. Attempting to replace that without having undergone rigorous training invites disaster. That’s because the spring could snap and damage a vehicle or other item. Even worse, the violent spring motion may injure, maim or kill the would-be fixer or anyone nearby.
The Best Choice
Having garage spring replacement by a company like Texas Overhead Door is an easy decision when garage door repair is needed. After all, they have the type of garage door springs Burleson residents deserve and have three decades worth of experience in the field. Contact them today.
